Help How to connect to WiFi By Default Connman is used to connect online. To open Connman in the Menu navigate to Applications > Preferences > Connman UI Setup. Normally Ethernet (wired) will connect automatically but if you find you’re not connected check the “Wired” is “on” not “off”. To connect to Wireless click on the “Wireless” Tab. Click and highlight your internet provider and Click “Connect”. Agent Input will open. Simply enter your Password in the Passphase box and click “OK” to connect. Wait a few seconds and you should be online. How to Install LegacyOS LegacyOS uses the antiX / MX installer to install LegacyOS to a PC / Laptop’s Hard Drive. The Installer guides Users through the process which involves choosing a Keyboard Layout, Partitioning the Hard Drive, Formatting it and copying LegacyOS to it. As LegacyOS is installing a User sets their Location and Time Zone and finally their User Name and Password and all going well, upon reboot logins in to their new LegacyOS Desktop. Upon starting the Installer you will be asked if you want to install LegacyOS fully to Hard Drive or install it next to Windows / another Linux Distro. This Guide is for those installing LegacyOS fully to Hard Drive and being the only Operating System installed. To start click “Regular install using the entire disk. Click “YES” to Format and Install LegacyOS. LegacyOS should start installing itself to your Hard Drive. What’s this? the install has Failed? Why? What’s Going on? If this is the first time you’ve tried installing LegacyOS or another Linux Distro on this PC / Laptop then the install should complete without error. Sometimes if the original Operating system is installed over a large number of Partitions then the installer can get confused and fail. As before click “Regular install using the entire disk and watch the percentage. If it gets to 13% the installer should continue and complete. If it fails again, exit the Installer, wait a few seconds and restart the installer again. Keep doing these steps until the installer doesn’t fail and the install process continues. Note: For most of you the install process will go smoothly and complete first time. This information is for those who experience problems during the install. Now it time to set your Locale and Time Zone. Simply choose your Locale (Keyboard and Language). Now choose your Country and City and Click “Next” Now is the time to setup your User Name and Password. You can also setup a Root Password if require. If you have only setup a User Name and Password and need to use Terminal, just use sudo when login in as Root. All going well you will be asked to reboot your PC / Laptop. Click “Finish” and your system will shut down and reboot. Remember upon shut down to remove your USB / DVD media. Congratulations you now have LegacyOS installed on you computer. Enjoy. How to fix Sound On PC’s and Laptops with HDMI you will most likely have to choose your Sound Card unless you have a HDMI Monitor connected. You will find this option in the Control Centre. You may find whatever you do there’s still no sound. Open Qasmixer, select “Sysdefault” on the right side and select “Master” or “Speaker” if not selected. Hopefully you will now have sound. If your soundcard isn’t configured at startup and you have to manually set it up, you may find the Taskbar is missing the Volume Control. A reboot should cause the Volume Control to appear.